ລາຍລະອຽດ
ການຕັ້ງຄ່າເສື້ອຜ້າສ່ວນເທິງ:
Tank body: The total volume is approximately 33 cubic meters, with a sewage tank volume of about 25 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank are interconnected through a 100mm ball valve;
High-pressure section: The high-pressure pump adopts a flow rate of 350, with two inlet filters (a filter barrel and a Y-shaped filter...
ການຕັ້ງຄ່າເສື້ອຜ້າສ່ວນເທິງ:
Tank body: The total volume is approximately 33 cubic meters, with a sewage tank volume of about 25 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank are interconnected through a 100mm ball valve;
High-pressure section: The high-pressure pump adopts a flow rate of 350, with two inlet filters (a filter barrel and a Y-shaped filter screen to prevent impurities from entering the high-pressure pump), a 60-meter 25-millimeter high-pressure hose, a long straight spray nozzle, a water mine nozzle, and a hydraulic high-pressure reel that can rotate 180 degrees (driven by a hydraulic motor). The high-pressure reel is equipped with a high-pressure hose for water spraying and a pneumatic water blowing device;
Sewage suction section: Equipped with a 420 horsepower auxiliary engine set, a 2BE-258 water circulation pump vacuum sewage suction system, a top overflow prevention device, an enlarged water tank for the water ring pump, and a sight pipe for feces.
Other configuration requirements: A platform for laying pipes on both sides with patterned plates, stainless steel guardrails, two standard oversized toolboxes, a water sprinkler port on the top of the clean water tank, a cement port on the top of the sewage tank, a hydraulic jacking system for lifting and dumping the tank body from below, with a ladder, a fully enclosed large rear cover, and a 600mm quick-opening hydraulic opening; a guardrail on the top walking platform, fire hydrant ports on both sides of the clean water tank, a 100mm drainage port on the right side of the clean water tank; one 6-inch drain valve on the lower left of the rear cover, one 4-inch ball valve on the lower right of the rear cover, one 4-inch ball valve on the upper right of the rear cover, a 100mm suction port on the right side of the tank body, with LED engineering arrow lights for illumination, two clearance lights on the top, and electric side lights; stainless steel ladders for the sewage and water storage compartments inside the tank, a 1.2m wide stainless steel bottom plate at the bottom, and the overall vehicle color: to be determined.
Advantages: 1. The entire vehicle is made of laser-cut parts; 2. Independent welding is completed before painting; 3. Standardized production (aesthetic and elegant appearance), with enhanced stability and greater durability.
ລາຍຊື່ທີ່ກ່ຽວຂ້ອງ
ບໍລິສັດລົດຍົນ Shenbai ໄດ້ຮັບການຈັດອັນດັບໃຫ້ເປັນວິສາຫະກິດລະດັບ AAA ໂດຍສະຖາບັນການເງິນ, ໄດ້ຮັບການຍອມຮັບວ່າເປັນວິສາຫະກິດທີ່ “ປະຕິບັດຕາມສັນຍາ ແລະ ໜ້າເຊື່ອຖື” ໂດຍອົງການບໍລິຫານອຸດສາຫະກຳ ແລະ ການຄ້າແຂວງຫູເປີຍ, ແລະ ໄດ້ຮັບການຂະໜານນາມໃຫ້ເປັນ “ວິສາຫະກິດເອກະຊົນທີ່ໂດດເດັ່ນຂອງເມືອງສຸຍໂຈ່ວ” ໂດຍຄະນະກຳມະການພັກເທດສະບານ ແລະ ລັດຖະບານເທດສະບານສຸຍໂຈ່ວ.