Description
Tank body: The total volume is approximately 33 cubic meters, with a sewage tank volume of about 25 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank are interconnected through a 100mm ball valve;
High-pressure section: The high-pressure pump adopts a Pinford 350 flow rate, with two intake filters (a filter barrel and a Y-shaped filter screen to prevent impurities…
Tank body: The total volume is approximately 33 cubic meters, with a sewage tank volume of about 25 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank are interconnected through a 100mm ball valve;
High-pressure section: The high-pressure pump adopts a Pinford 350 flow rate, with two intake filters (a filter barrel and a Y-shaped filter screen to prevent impurities from entering the high-pressure pump), a 25mm high-pressure hose of 60 meters, a long straight spray nozzle, a water mine nozzle, and a hydraulic high-pressure reel that can rotate 180 degrees (driven by a hydraulic motor). The high-pressure reel is equipped with a high-pressure hose for water spraying and a pneumatic water blowing device;
Sewage suction part: It adopts a 420 horsepower auxiliary engine set with a 2BE-258 water circulation pump and vacuum pump sewage suction system, a top overflow prevention device, an enlarged water ring pump water tank, and a sight pipe.
Other configuration requirements: Platforms for laying flat pattern plates on both sides for pipe placement, stainless steel guardrails, two standard oversized toolboxes, a sprinkler nozzle on the top of the clean water tank, a cement nozzle on the sewage tank, a hydraulic bottom-mounted lifting system for dumping, with ladder, fully enclosed large rear cover, with 700mm quick-opening hydraulic opener; a guardrail on the top walking platform, fire hydrants on both sides of the clean water tank, a 100mm drainage outlet on the right side of the clean water tank; one 6-inch drain valve on the lower left of the rear cover, one 4-inch ball valve on the upper left of the rear cover, one 4-inch ball valve on the lower right of the rear cover, one 4-inch ball valve on the upper right of the rear cover, with illuminating lights, two clearance lights on the top, with electric side lights; stainless steel ladders for the sewage and water storage compartments inside the tank, a 1.2m wide stainless steel bottom plate at the bottom, vehicle color: to be determined.
Advantages: 1. The entire vehicle is made of laser-cut components; 2. Independent welding is completed before painting; 3. Standardized production (atmospheric and aesthetically pleasing), with stronger stability and greater durability.
Related listings
Shenbai Automobile has been rated as an AAA-level enterprise by financial institutions, recognized as a “contract-abiding and trustworthy” enterprise by the Hubei Provincial Administration for Industry and Commerce, and named an “Outstanding Private Enterprise of Suizhou City” by the Suizhou Municipal Party Committee and Municipal Government.