说明
Upper garment configuration:
Tank body: The total volume is approximately 22 cubic meters, with a sewage tank volume of about 15 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank are interconnected through a 100mm ball valve;
High-pressure section: The high-pressure pump adopts the Pinford 350 flow rate, equipped with two inlet filters (a filter barrel and a Y-shaped...
Upper garment configuration:
Tank body: The total volume is approximately 22 cubic meters, with a sewage tank volume of about 15 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank are interconnected through a 100mm ball valve;
High-pressure section: The high-pressure pump adopts the Pinford 350 flow rate, equipped with two inlet filters (a filter barrel and a Y-shaped filter screen to prevent impurities from entering the high-pressure pump), a 25mm high-pressure hose of 60 meters, a long straight spray nozzle, and a water mine nozzle. The hydraulic high-pressure reel can rotate 180 degrees (driven by a hydraulic motor), and the high-pressure reel is equipped with a high-pressure hose for water spraying and a pneumatic water blowing device;
Sewage suction section: It adopts a 375 horsepower auxiliary engine set with a SK-30 water circulation pump vacuum pump, or a 420 horsepower auxiliary engine set with a 2BE-258 water circulation pump vacuum pump sewage suction system. It features a top overflow prevention device, an enlarged water ring pump water tank, and a sight flow pipe.
Other configuration requirements: Both sides of the platform should be paved with patterned plates for pipe placement, equipped with stainless steel guardrails. It should come standard with two enlarged toolboxes, a water sprinkler on the top of the clean water tank, a cement opening for the sewage tank, a hydraulic jacking system for the tank body to lift and dump, with a ladder, a fully enclosed large rear cover, and a 600mm quick-opening hydraulic opener. The top walking platform should have guardrails, and there should be fire hydrant filling ports on both sides of the clean water tank. There should be one 6-inch drain valve on the lower left side of the rear cover, one 4-inch drain valve on the upper right side of the rear cover, and one 4-inch ball valve on the lower right side of the rear cover. A 4-inch ball valve connecting pipe should be connected to the top of the tank body. There should be tail arrow lights, headlights, two clearance lights on the top, and electric side lights. Inside the tank, there should be ladders for the sewage and water storage bins. The overall color of the vehicle is yet to be determined.
Advantages: 1. The entire vehicle is made of laser-cut components; 2. Independent welding is completed before painting; 3. Standardized production (atmospheric and aesthetically pleasing), with stronger stability and greater durability.
