说明
Upper garment configuration:
Tank body: The total volume is approximately 22 cubic meters, with a sewage tank volume of about 15 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank have a 100mm ball valve interconnection function;
High-pressure section: The high-pressure pump adopts the Pinford 350 flow rate, equipped with two inlet filters (a filter barrel and a Y-shaped...
Upper garment configuration:
Tank body: The total volume is approximately 22 cubic meters, with a sewage tank volume of about 15 cubic meters, and the rest being clean water tanks. The tank body is made of 8mm high-quality steel plates. The sewage tank and clean water tank have a 100mm ball valve interconnection function;
High-pressure section: The high-pressure pump adopts the Pinford 350 flow rate, equipped with two inlet filters (a filter barrel and a Y-shaped filter screen to prevent impurities from entering the high-pressure pump), a 25mm high-pressure hose of 60 meters, a long straight spray nozzle, a water mine nozzle, and a hydraulic high-pressure reel that can rotate 180 degrees (driven by a hydraulic motor). The high-pressure reel is equipped with a high-pressure hose for water spraying and a pneumatic water blowing device;
Sewage suction part: It adopts a 375-horsepower auxiliary engine set with a SK-30 water circulation pump vacuum pump, or a 420-horsepower auxiliary engine set with a 2BE-258 water circulation pump vacuum pump sewage suction system. It is equipped with a top overflow prevention device, an enlarged water ring pump water tank, and a sight flow pipe.
Other configuration requirements: A platform for laying pattern plates on both sides for pipe placement, stainless steel guardrails, two standard oversized toolboxes, a water sprinkler nozzle on the top of the clean water tank, a cement nozzle on the sewage tank, a hydraulic jacking system for the tank body with a ladder, a fully enclosed large rear cover with a 600mm quick-opening hydraulic mechanism, a guardrail on the top walking platform, fire hydrants on both sides of the clean water tank, one 6-inch drain valve on the lower left of the rear cover, one 4-inch drain valve on the upper left of the rear cover, one 4-inch ball valve on the lower right of the rear cover, a 4-inch ball valve on the right side of the tank body with a connecting pipe to the top of the tank, tail arrow lights, headlights, two clearance lights on the top, and electric side lights; ladders for the sewage and water tanks inside the vehicle; vehicle color: to be determined.
Advantages: 1. The entire vehicle is made of laser-cut parts; 2. Independent welding is completed before painting; 3. Standardized production (atmospheric and beautiful appearance), stronger stability, and greater durability.
